Dascom 7010 Programmers Manual ZPL Uživatelský manuál stáhnout pdf (Strana 14)

2.Tear-On - After printing, the next label is positioned under the printhead (no backfeed

motion).

3.Peel-Off - After printing, the label is moved forward and activated a label Available

Sensor. Printing stops until the label is manually removed from the printer.

Power peel-backing material is automatically rewound using an optional internal rewind

spindle.

4.Cutter - After printing, the media feeds forward and is automatically cut into

predetermined lengths.

Format: ^MMa,b

Parameters:

a = desired mode

Accepted Values:

T = tear off

P = peel off

R = tear on

C = cutter

Default Value: T

b = not care

The command will be ignored if parameters are missing or invalid. The current value of the

command will remain unchanged.

^MN

Media Tracking

Description:

The ^MN command relays to the printer what type of media is being used(continuous or

non-continuous) for purposes of tracking. There are two choices for this command:

1.Continous Media – This media has no physical characteristic(web, notch, perforation,

mark, etc,)to separate labels. Label Length is determined by the ^LL command.

2.Non-continuous Media – This media has some type of physical characteristic(web, notch,

perforation, mark, etc,)to separate the labels.

Format: ^MNa

Parameters:

a = media being used

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Žádné komentáře

Dascom 7010 Programmers Manual ZPL Uživatelský manuál Strana 14